43 results

  • "AGRIFUTURE FILM" - COMPLETE BLOWN FILM LINES

    New
    • plastprintpack Ethiopia 2018
    • Millenium Hall E.4.1
    • plast alger 2018
    • Hall 1 1D.31
    • plastprintpack Nigeria 2018
    • Landmark Centre - hall 1 1E.1.1
    Today, agrifilm production is predominantly obtained by multi-layer coextrusion lines while single-layer film application is increasingly intended for a limited and low target market. Nowadays, three-layer coextrusion lines are preferred as they satisfy the current requirements for agrifilm. Nonetheless, future trends are toward 5-layer line configuration (with the possibilities to have 7-layer configuration). The multi-layer film ensuresan enhanced management of raw process materials and optimi…
    Save
  • AMAPLAST

    Italy
    • plastprintpack Ethiopia 2019
    • Millenium Hall A.1
    • plastprintpack Nigeria 2019
    • Landmark Centre - hall 1 1F.6
    • plastprintpack West Africa 2018
    • Radisson Blu Hotel Abidjan Airport B.12
    • plast alger 2018
    • Hall 1 1C.36
    • plastprintpack Nigeria 2018
    • Landmark Centre - hall 1 1E.1.3
    AMAPLAST, Italian Plastics and Rubber Processing Machinery and Moulds Manufacturers' Association, representing about 170 important Italian manufacturers, promotes worldwide the knowledge of the Italian processing technologies and through its commercial company PROMAPLAST srl: publishes the technical magazine MacPlas (www.macplas.it), organizes the international exhibition PLAST, the second largest show in Europe. Next edition of PLAST will be held in Milan, May 4-7, 2021 (more info: www.plastonl…
    Save
  • Amut S.p.A.

    Italy
    • plast alger 2018
    • Hall 1 1D.14
    • plastprintpack Nigeria 2017
    • plast alger 2016
    Since 1958, the Italian AMUT has manufactured custom-tailored solutions and turn-key plants, in its four machinery & technology divisions - Extrusion, Thermoforming, Recycling and Printing/Converting. AMUT GROUP is also present in North America, Brazil (AMUT WORTEX) and South East Asia to offer the best possible on-site service and a faster response to meet local demands. AMUT is a reliable manufacturer of complete extrusion lines for foils, sheets, pipes, profiles, as well as extruders …
    Save
  • Bandera Luigi Costruzioni Meccaniche S.p.A.

    Italy
    • plastprintpack Ethiopia 2018
    • Millenium Hall E.4.1
    • plast alger 2018
    • Hall 1 1D.31
    • plastprintpack Nigeria 2018
    • Landmark Centre - hall 1 1E.1.1
    Bandera supplies complete extrusion lines for the production of agricultural film, mono and multilayer film for technical packaging in 3-5-7 and 9 layers, biodegradable films and high thickness film for geomembranes used in civil and industrial waterproofing systems. Bandera also supplies innovative know-how and technologies of the latest thermoplastic material processing for the production of industrial sacks, shoppers and various bags, as well as of shrink film (cover pallets and stretch caps)…
    Save
  • Aldo Basile

    Visitor of Bausano & Figli SPA
    • plast alger 2018
    • Hall 1 1D.25
    • plast alger 2016
    Save
  • Bausano & Figli SPA

    Italy
    • plast alger 2018
    • Hall 1 1D.25
    • plast alger 2016
    Bausano doesn't only produce top-class plastic extrusion lines, but puts the client's​ needs and wants at the center of everything it does. That's we we like to call ourselves "Your Extrusion Allies"​ Bausano extrusion lines are used for the production of granules, profiles, pipes, pockets and medical tubes, WPC profiles and granules. Other than extruders, Bausano also provides a full range of complementary accessories for calibration, cooling, hauling off and cutting. Bausano offers: • Extrusio…
    Save
  • Blow Moulding

    Product of MacPlas
    • plastprintpack Ethiopia 2019
    • Millenium Hall A.1
    • plastprintpack Nigeria 2019
    • Landmark Centre - hall 1 1F.6
    • plastprintpack West Africa 2018
    • Radisson Blu Hotel Abidjan Airport B.12
    • plast alger 2018
    • Hall 1 1C.36
    Full range of granulators for small bottles,tanks and jerry cans to 200 litre, coex fuel tanks 15kg, IBC container, without pre-cutting. In line grinding of pieces from blow moulding and runners to 180°C. 23.000 bottles/h of 0,75 liter ground at start up, whithout fly-back.  
    Save
  • Blow moulds

    Product of Simex
    • plast alger 2018
    • Hall 1 1E.19
    Manufacturing of Blow Moulds Design and manufacturing of Blow Moulds for machines with 2 steps technology: Sidel,Sipa, Krupp, Krones, Dynablow, Siapi, etc. Design and manufacturing of Blow Moulds for machines with extrusion/blow technology from 0.25 to 300 Lt. Design and manufacturing of Injection and Blow Moulds for machines with 1 step technology for PET and other materials.
    Save
  • Blown and cast film extrusion lines

    • plast alger 2018
    • Hall 1 1A.12
    Save
  • CANTONI S.r.l.

    Italy
    • plastprintpack iraq 2019
    • Hall 5 5C.5
    • plast alger 2018
    • Hall 1 1D.21
    • plast alger 2016
    Cantoni has deep roots dating back to 1960's . The company  continuously improve its products and direct its activities to study any new tooling applications and new targets, to be shared with those customers who decide work with us and our equipment. Real achievement to be shared with our clients, made of strategies, men and plants improving results, applying the best example of technology. Cantoni is capable to fulfill the ever increasing request for flexibility and high quality products which…
    Save
  • Coating plant for finishing of leather system

    Product of Cos.T.A. Srl
    New
    • plast alger 2018
    • Hall 1 1A.17
    This really new technology is based on experience and know-how combination through by-cast and finishing system . The purpose is to apply on a buffed or full grain , no stucco leather , a water-base polyurethane compound with pigments , matching the leather with a by-cast embossed paper . In this way we are able to achieve an hight selection improvement , keeping unchanged the softens of the leather .
    Save
  • Colines SPA

    Italy
    • plast alger 2018
    • Hall 1 1C.32
    • plast alger 2016
    As the ownership is the same, GRUPPO COLINES® is strictly connected to B-PACK® HOLDING (www.b-pack.it), whose companies produce high quality barrier cast and blown film and alveolar PP sheets (BUBBLE GUARD® BOARD). Thanks to his verticalization process, which is unique on the market, this hands-on involvement in the sector permits COLINES® to engineer, manufacture and test its lines directly and to gain the necessary insight needed to be ahead of qualitative standards, optimize technical timing …
    Save