213 results

Filter search

Apply filters

Types

Product groups

213 results

  • "AGRIFUTURE FILM" - COMPLETE BLOWN FILM LINES

    New
    • plastprintpack Ethiopia 2018
    • Millenium Hall E.4.1
    • plast alger 2018
    • Hall 1 1D.31
    • plastprintpack Nigeria 2018
    • Landmark Centre - hall 1 1E.1.1
    Today, agrifilm production is predominantly obtained by multi-layer coextrusion lines while single-layer film application is increasingly intended for a limited and low target market. Nowadays, three-layer coextrusion lines are preferred as they satisfy the current requirements for agrifilm. Nonetheless, future trends are toward 5-layer line configuration (with the possibilities to have 7-layer configuration). The multi-layer film ensuresan enhanced management of raw process materials and optimi…
    Save
  • omet Aberto

    Visitor of OMET SRC
    Save
  • ACIMGA
    Association of Italian manufacturers of machinery for the graphic, paper and converting industry

    Italy
    • plastprintpack Nigeria 2020
    • Landmark Centre - hall 1 1.G.13
    • printpack alger 2020
    • Hall 2 2A.40
    • plastprintpack Ethiopia 2019
    • Millenium Hall A.1
    • plastprintpack Nigeria 2019
    • Landmark Centre - hall 1 1F.6
    • plastprintpack West Africa 2018
    • Radisson Blu Hotel Abidjan Airport B.12
    Acimga is the association of Italian manufacturers of machinery for the graphic, paper and converting industry. Established in 1947, it plays a key role in the industry both in Italy and internationally representing “Made by Italy” production – that is, not just machinery produced in Italy, but the wealth of competence and expertise unique to the country which is the trademark of these technologies, regardless of where they are manufactured. ACIMGA is part of a national and international networ…
    Save
  • Activated Carbon

    • plast alger 2018
    • Hall 1 1B.06
    Our activated carbon products effectively remove pollutants, contaminants and other impurities from water, air, food and beverages, pharmaceuticals and more. We are a global leader in the research, development, manufacturing and sale of high-grade activated carbon used in a growing range of environmental, health, safety and industrial applications. Building on our more than 90-year history of innovative product development, we produce a diverse array of products with over 150 different activat…
    Save
  • federico AIAZZI

    Visitor of BAIMAR
    Save
  • Air ring blower

    plast alger 2016
    Above picture shows a brand new 9-layers co-ex film blowing line which we have just completed for a customer in USA. The line was built with many special requests from our customer and the main features are described in brief details on the following pages. The technical manager from the customer has been here twice to test run this line and he is extremely pleased with the line, its high quality and great performance. At the first visit about a month ago he came along with two more engineers fr…
    Save
  • SUISSA ALBERT

    Visitor of SALUSWORLD
    Save
  • ALUSILVER

    Product of S2 Converting SRL
    • printpack alger 2020
    • Hall 2 2B.41
    Save
  • AMAPLAST

    Italy
    • plastprintpack Nigeria 2020
    • Landmark Centre - hall 1 1.G.13
    • plast alger 2020
    • Hall 1 1D.26
    • plastprintpack Ethiopia 2019
    • Millenium Hall A.1
    • plastprintpack Nigeria 2019
    • Landmark Centre - hall 1 1F.6
    • plastprintpack West Africa 2018
    • Radisson Blu Hotel Abidjan Airport B.12
    • plast alger 2018
    • Hall 1 1C.36
    • plastprintpack Nigeria 2018
    • Landmark Centre - hall 1 1E.1.3
    AMAPLAST, Italian Plastics and Rubber Processing Machinery and Moulds Manufacturers' Association, representing about 170 important Italian manufacturers, promotes worldwide the knowledge of the Italian processing technologies and through its commercial company PROMAPLAST srl: publishes the technical magazine MacPlas (www.macplas.it), organizes the international exhibition PLAST, the second largest show in Europe. Next edition of PLAST will be held in Milan, May 4-7, 2021 (more info: www.plastonl…
    Save
  • karim amrouche

    Visitor of plastic processing machinery
    Save
  • Amut S.p.A.

    Italy
    • plast alger 2018
    • Hall 1 1D.14
    • plastprintpack Nigeria 2017
    • plast alger 2016
    Since 1958, the Italian AMUT has manufactured custom-tailored solutions and turn-key plants, in its four machinery & technology divisions - Extrusion, Thermoforming, Recycling and Printing/Converting. AMUT GROUP is also present in North America, Brazil (AMUT WORTEX) and South East Asia to offer the best possible on-site service and a faster response to meet local demands. AMUT is a reliable manufacturer of complete extrusion lines for foils, sheets, pipes, profiles, as well as extruders …
    Save
  • DANIELE ANCARANI

    Visitor of IPM S.R.L.
    Save
  • Ancillary equipment for injection moulding machines

    plast alger 2016
    Ancillary equipment such as conveyors in aluminium, iron, stainless steel and most recently in modular structure entirely in recyclable thermoplastic resin ; conveyor belts, granulators, mixers, hopper loaders, masterbatch dosing systems, cap-coolers and other accessory items used for the automation of plastic production processes ; internal transport systems, as well as automation and accessories for different moulding processes for the plastic industry
    Save
  • Denti Angelo

    Visitor of Smart Track di Denti Angelo
    Save
  • Andrea Arbarelli

    Visitor of Bausano & Figli SPA
    • plast alger 2020
    • Hall 1 1C.44
    • plast alger 2018
    • Hall 1 1D.25
    • plast alger 2016
    Save
  • ARTURO EL MEHDI ARBORE

    Visitor of AVANTECH
    Save
  • Giacomo Ardizio

    Visitor of TELOS Trading snc
    Save
  • Orlando Arturi

    Visitor of Nova Frigo Engineering Srl
    Save
  • AUTOMA 374

    Product of Bieffebi Srl
    New
    • printpack alger 2020
    • Hall 2 2C.14
    Save
  • Automatic screen changers for plastics

    Product of FIMIC Srl
    • plast alger 2020
    • Hall 1 1D.25
    We’ve been designing and manufacturing self-cleaning, automatic melt filters for over twenty years, entirely in FIMIC facilities. The deep level of expertise we reached in the field allows us guarantee our customers complete satisfaction and significant savings. Our aim is to improve the efficiency of your production line and the quality of your output, and we achieve that through a continuous optimization of our own production processes and timeframes. That is why our screen changers are peer…
    Save
  • semlali badra

    Visitor of saponificio toscano
    Save
  • Bandera Luigi Costruzioni Meccaniche S.p.A.

    Italy
    • plastprintpack Ethiopia 2018
    • Millenium Hall E.4.1
    • plast alger 2018
    • Hall 1 1D.31
    • plastprintpack Nigeria 2018
    • Landmark Centre - hall 1 1E.1.1
    Bandera supplies complete extrusion lines for the production of agricultural film, mono and multilayer film for technical packaging in 3-5-7 and 9 layers, biodegradable films and high thickness film for geomembranes used in civil and industrial waterproofing systems. Bandera also supplies innovative know-how and technologies of the latest thermoplastic material processing for the production of industrial sacks, shoppers and various bags, as well as of shrink film (cover pallets and stretch caps)…
    Save
  • VINCENZO BASILE

    Visitor of AFB
    Save
  • Bausano & Figli SPA

    Italy
    • plast alger 2020
    • Hall 1 1C.44
    • plast alger 2018
    • Hall 1 1D.25
    • plast alger 2016
    Bausano is a family company that has been designing and producing extrusion lines for plastics processing since 1946. For more than 70 years we have focused on quality and have stood out for the flexibility and attention given to every single need of each customer. During the design stage we study the best solutions for your business, customising our machines with you, who choose our company as your partner. Bausano doesn't only produce top-class plastic extrusion lines, but puts the client'…
    Save
  • Bieffebi Srl

    Italy
    • printpack alger 2020
    • Hall 2 2C.14
    SINCE 1955 REFERENCE BRAND IN FLEXOGRAPHIC PRINTING Mission The desire to be “the best” in the market has been the passion of BIEFFEBI from the beginning. Since 1955 the company has been producing ancillary machines for the flexographic printing industry. Absolute quality is the mission of this company, beginning with fine attention to detail through to equipment designed to the highest construction strength and reliability. Today the company is present in more than 100 countries, a…
    Save
  • Binova Sr.

    Italy
    plast alger 2016
    The professionalism of the operating and managerial staff, the exclusive cooperation with Suppliers - with whom the Company has established a sound policy based on integration and development for the application of new technologies - and the solidly supportive relationship with Customers, allow Binova to play an innovative role among equipment manufacturers in this field.   In order to meet the growing demand for innovative equipment and plants for processing and extruding increasingly comp…
    Save
  • ERIK BLAUWET

    Visitor of NATUURPUNT
    Save
  • Blow Moulding

    Product of MacPlas
    • plastprintpack Nigeria 2020
    • Landmark Centre - hall 1 1.G.13
    • plast alger 2020
    • Hall 1 1D.26
    • plastprintpack Ethiopia 2019
    • Millenium Hall A.1
    • plastprintpack Nigeria 2019
    • Landmark Centre - hall 1 1F.6
    • plastprintpack West Africa 2018
    • Radisson Blu Hotel Abidjan Airport B.12
    • plast alger 2018
    • Hall 1 1C.36
    Full range of granulators for small bottles,tanks and jerry cans to 200 litre, coex fuel tanks 15kg, IBC container, without pre-cutting. In line grinding of pieces from blow moulding and runners to 180°C. 23.000 bottles/h of 0,75 liter ground at start up, whithout fly-back.  
    Save
  • Blow moulds

    Product of Simex Srl
    • plast alger 2020
    • Hall 1 1D.24
    • plast alger 2018
    • Hall 1 1E.19
    Manufacturing of Blow Moulds Design and manufacturing of Blow Moulds for machines with 2 steps technology: Sidel,Sipa, Krupp, Krones, Dynablow, Siapi, etc. Design and manufacturing of Blow Moulds for machines with extrusion/blow technology from 0.25 to 300 Lt. Design and manufacturing of Injection and Blow Moulds for machines with 1 step technology for PET and other materials.
    Save
  • Blown and cast film extrusion lines

    • plast alger 2018
    • Hall 1 1A.12
    Save
  • BMSvision

    Belgium
    • plast alger 2020
    • Hall 1 1C.62
    With over 40 years of experience, BMSvision is a leading global supplier of Manufacturing Execution Systems (MES) for the discrete manufacturing industry, with focus on the textile and plastics industry. A group of highly skilled R&D experts develop hardware and software solutions that help our global customers optimizing their operations. A team of project managers and field engineers install and service our solutions on a global scale. Today, leading companies all over the world rely on the BM…
    Save
  • KAMAL BOUIRY

    Visitor of DIAMOUN PLAST
    Save
  • C.O.I.M. S.p.A.

    Italy
    plast alger 2016
    COIM is present in every corner of the world and boasts a network of almost 900 people responsible for providing the high quality services and products one would expect from a well-established and prestigious company. The flexibility, capability and efficiency of its structure are achieved through the close partnership and collaboration with its clients. Its many subsidiaries and a strong network of agents/distributors mean that COIM has a well-established presence in the main countries of the…
    Save
  • Cabot Plastics Belgium

    Belgium
    • plast alger 2018
    • Hall 1 1B.06
    Cabot Corporation (NYSE: CBT) is a leading global specialty chemicals and performance materials company headquartered in Boston, Massachusetts, USA. Our businesses deliver a broad range of products and solutions to customers in every corner of the globe, serving key industries such as transportation, infrastructure, environment and consumer. We provide performance solutions that solve customers' challenges today while preparing them to meet tomorrow’s needs. Our commitment to innovation is dri…
    Save
  • CANTONI S.r.l.

    Italy
    • plast alger 2020
    • Hall 1 1C.46
    • plastprintpack iraq 2019
    • Hall 5 5C.5
    • plast alger 2018
    • Hall 1 1D.21
    • plast alger 2016
    Cantoni has deep roots dating back to 1960's . The company  continuously improve its products and direct its activities to study any new tooling applications and new targets, to be shared with those customers who decide work with us and our equipment. Real achievement to be shared with our clients, made of strategies, men and plants improving results, applying the best example of technology. Cantoni is capable to fulfill the ever increasing request for flexibility and high quality products which…
    Save
  • SCHETTINO CARMINE

    Visitor of SUPER PLASTIK
    Save
  • Walter cavicchioli

    Visitor of PENTA
    Save
  • walter cavicchioli

    Visitor of PENTA
    Save
  • Fabio Cesari

    Visitor of Gefran SpA
    Save
  • Chemical products

    Product of C.O.I.M. S.p.A.
    plast alger 2016
    Products having high technological content, sold for their performances rather than chemical specifications. Moreover they are based on a strong Research and Development effort and are supported by technical service. Besides the products usually available, COIM can also supply taylor made products to satisfy the specific needs of the Customers.
    Save
  • Coating plant for finishing of leather system

    Product of Cos.T.A. Srl
    New
    • plast alger 2018
    • Hall 1 1A.17
    This really new technology is based on experience and know-how combination through by-cast and finishing system . The purpose is to apply on a buffed or full grain , no stucco leather , a water-base polyurethane compound with pigments , matching the leather with a by-cast embossed paper . In this way we are able to achieve an hight selection improvement , keeping unchanged the softens of the leather .
    Save
  • Colines Spa

    Italy
    • plast alger 2020
    • Hall 1 1C.48
    • plast alger 2018
    • Hall 1 1C.32
    • plast alger 2016
    As the ownership is the same, GRUPPO COLINES® is strictly connected to B-PACK® HOLDING (www.b-pack.it), whose companies produce high quality barrier cast and blown film and alveolar PP sheets (BUBBLE GUARD® BOARD). Thanks to his verticalization process, which is unique on the market, this hands-on involvement in the sector permits COLINES® to engineer, manufacture and test its lines directly and to gain the necessary insight needed to be ahead of qualitative standards, optimize technical timing …
    Save
  • Colorprint S.P.A.

    Italy
    printpack alger 2016
    Printing inks We produce a wide range of printing inks, suitable for different printing technologies: offset, flexographic and rotogravure.
    Save
  • COMI SpA

    Italy
    plast alger 2016
    Comi is specialized in the production of machines for plastic vacuum thermoforming. It also produces other types of machines for thermoformed finishing as guillotines, laser cutting systems, CNC, waterjet machines and also presses for composite and rubber.
    Save
  • CONTAINER MIXER TRX

    Product of Promixon Srl
    plast alger 2016
    The TRX series of container mixers provide the best alernative to conventional high speed mixers when production conditions require a high versatility and a wide range of different products to be mixed with the same mixer. Thanks to the container mixer special design divided into two separate units, mixing head and potable container, the cleaning time between batches in minimized therefore the risk of contamination too when switching from one type of production to another. Mix, storage…
    Save
  • Cos.T.A. Srl

    Italy
    • plast alger 2018
    • Hall 1 1A.17
    COS.T.A. company was founded in 2000, has developed into an organized, specialty business , where process competence and passion for innovation are the key words of our activity. The product fields where we are successful are the following: - Synthetic leather production & finishing machinery - Leather & leather split ennobling & finishing, by Acquacast, Top Leather, and Matrix technologies - Tarpauling production & printing machinery - Carbon, glass & aramidic semi-wet for had harmour, printed …
    Save
  • Cronoroll

    plast alger 2016
    CRONOROLL available in 1100, 1200, 1300 formats, equipped with a winder, is specifically designed for the production of bottom-welded rolled bags, with or without carton cores, and maximum speed of 150 m/min. CRONOROLL has 3 tracks with a maximum width of 38 cm each, within 3 winding workstations and paper closing. Automatic packaging is available on request.
    Save
  • Bertazzon Dario

    Visitor of OM Siderurgica SRL
    Save
  • Umberto Daverio

    Visitor of CMG S.r.l.
    Save
  • DB100 Full automatic bagger

    plast alger 2016
    Compact, fully automatic machine to pack bottles into bags automatically. Width adjustable 350–550mm / 400–600mm / 500–800mm, length adjustable 200-600mm. Pharma bagger. Optionally we can make hermetically bags. Optionally with shrinking tunnel (better stability and manipulation of the bags). ADVANTAGES Flexible unit (can pack wide range of products) Fast changeover times Reduces the manual labor and packaging material cost resulting in a short return on investment Hygienic wa…
    Save
  • DCH200

    Product of SCS AUTOMABERG SRL
    • printpack alger 2018
    • Hall 2 2A.03
    The world of packaging is evolving fast, and digital printing is creating new requirements for our clients. The possibility of high quality printing with small/medium print runs and high speeds has made the development of a die cutting solution necessary. The DCH200 takes care of this. Using tried and tested traditional dies, our DCH200 die cutter allows drastic reductions in start up times and work repetition, increasing the quality of the die cut product. Our STEP&REPEAT system allows reductio…
    Save
  • GIOVANNI DE ROSA

    Visitor of SIPA SOUTH AFRICA
    Save
  • Delta Engineering BVBA

    Belgium
    plast alger 2016
    Company roots Delta Engineering was founded in 1992 by Danny De Bruyn and Rudy Lemeire, both engineers active in the production of plastic bottles. Noticing the lack of efficient leak detection equipment, they started designing and producing the UDK100, a single head leak tester. In the following months and years, they stayed very much attuned to the needs of their customers, leading quickly to the development of a whole range of solutions solving the actual problems of today comp…
    Save
  • gian luca desliens

    Visitor of ist
    Save
  • Herman Dewitte

    Visitor of BMSvision
    Sales Manager
    • plast alger 2020
    • Hall 1 1C.62
    Companies active in injection, extrusion and blow molding
    Save
  • Salvatore Di Sava

    Visitor of SOBELPAC
    Save
  • Salvatore Di Sava

    Visitor of SADIPAC
    Save
  • Die cutting machine Bulldog

    Product of SOMA spol. s r.o.
    • printpack alger 2020
    • Hall 2 2A.29
    • printpack alger 2018
    • Hall 2 2A.25
    The BULLDOG die cutting press is a roll to stack, off-line machine optimised for producing aluminium for yoghurt lids and similar applications. Lids of various configurations and sizes can be produced. http://www.soma-eng.com/products/die-cutters/bulldog
    Save
  • DigitempEvo water cooled thermochiller

    Product of Piovan Group
    • plast alger 2020
    • Hall 1 1D.33
    • plast alger 2018
    • Hall 1 1C.30
    • plast alger 2016
    DigitempEvo is the new flexible solution developed for industrial processes of heating and/or cooling. It integrates both temperature control and free-cooling functions, providing accurate water temperature, pressure and flow rate to every single circuit. The traditional centralized cooling system concept (chiller + TCU) is replaced by the newly introduced Flexcool solution, with one DigitempEvo dedicated to each user coupled with outdoors free cooling capabilities. State of the art design and t…
    Save
  • Easytherm temperature controller

    Product of Piovan Group
    • plast alger 2020
    • Hall 1 1D.33
    • plast alger 2018
    • Hall 1 1C.30
    • plast alger 2016
    With Easytherm, Piovan introduces a truly innovative temperature controller, as a result of a design driven by versatility and ease of use and digital integration with other machines of a system. Easytherm is the new mould temperature control unit characterized by user-friendliness, flexibility and reliability, both in injection and blow moulding and extrusion processes. A new interior and exterior layout, redesigned ergonomic control, coupled with high-end components, characterise a versatile m…
    Save
  • Ecodry

    • plastprintpack Nigeria 2020
    • Landmark Centre - hall 1 1.F.11
    Patented adiabatic cooler: the replacement for evaporative cooling tower Ecodry is a centralized closed-circuit adiabatic cooling system designed to replace the old cooling tower technology. Installed outside the system, it removes the heat extracted from the process, achieving: Better cooling performance with increased heat transfer efficiency Outstanding operating costs savings, resulting in a low Total Cost of Ownership New standards in terms of Environmental Impact, from both water footpri…
    Save
  • Euroter

    Product of Tecnofilm S.p.A.
    • plastprintpack Nigeria 2020
    • Landmark Centre - hall 1 1.F.10
    Our TPV – EUROTER vulcanized thermoplastic materials possess many properties typical of vulcanized rubber, offering high performance in terms of flexibility, resistance to extreme temperatures, resistance to oils, grease and most acids, good scratch, tear and ageing resistance, low compression set and good processability. They are used in the fields of domestic appliances, motor vehicles, building, electronics and sport. Special grades: • Loaded with a specific weight > 1 • Very low har…
    Save
  • Everglass

    Product of Rossini SpA
    • plastprintpack Ethiopia 2019
    • Millenium Hall A.20
    Plate holder sleeve for use with double-sided adhesive cushion tapes. The fibreglass on the outer side surface guarantees good mechanical strength, complete resistance against all solvents and dimensional stability. Use of the main industrial double-sided adhesive tapes allows perfect plate fastening in high speed printing, high quality printing and perfect removal on completion of the work without surface damage. The sleeve is not anti-static. Fibreglass base sleeve coated with layers of u…
    Save
  • Extruder series TM HT

    Product of F.lli MARIS S.p.A.
    • plast alger 2018
    • Hall 1 1D.23
    Maris presents the new HT Series of Extruders, which represents the experience gained from more than 50 years of working in this specific field. This Line of machine is characterized by innovative technological solutions, which have allowed the use of very high power. Pioneering solutions have also been applied to the compounding resulting in special new screw profiles to produce not only very high quality compounds, but also an increase in output up to 100%.
    Save
  • Extruders

    Product of Amut S.p.A.
    • plast alger 2018
    • Hall 1 1D.14
    • plastprintpack Nigeria 2017
    • plast alger 2016
    Range of more than 80 extruder models available.   AMUT extruders are designed to suit any application and customized according to the customer’s requirements. AMUT also develops and supplies drive gearing, screws and barrels. AMUT manufactures a wide range of screw geometries designed for each material to give the maximum output rates or have multi-purposes features to combine versatility and efficiency.   Features: high specialization for each application; high performances fo…
    Save
  • Extrusion lines for the productio of PC-PP hollow profile

    Product of Omipa S.p.A.
    • plastprintpack Nigeria 2020
    • Landmark Centre - hall 1 1.G.10
    • plast alger 2020
    • Hall 1 1D.23
    • plast alger 2018
    • Hall 1 1C.34
    • plastprintpack Nigeria 2017
    • plast alger 2016
    PC panels are an extremely flexible instrument with applications in the field of architecture and in the building industry. Light, easy to work, ductile in shapes and colours, all this makes hollow profiles in PC and PMMA - HIPMMA an unequalled and extraordinary material. Many applications produced with our lines were installed more than twenty years ago.
    Save
  • Extrusion lines for the production of sheet and foil

    Product of Omipa S.p.A.
    • plastprintpack Nigeria 2020
    • Landmark Centre - hall 1 1.G.10
    • plast alger 2020
    • Hall 1 1D.23
    • plast alger 2018
    • Hall 1 1C.34
    • plastprintpack Nigeria 2017
    • plast alger 2016
    Save
  • Extrusion-Blow Moulding machines

    Product of Meccanoplastica Srl
    plast alger 2016
    MECCANOPLASTICA has been manufcaturing Extrusion-Blow Moulding machines since 1983. These machines can produce bottles/containers of PE-PP-PVC-PETG and Co-Extrusion (Multi layers) material. Bottle volume from 5 Ml. up to MAX 25 Lit. The range of „Meccanoplastica“ Extrusion-Blow Moulding machine includes hydraulic-Hybrid and Full Electric machines.
    Save
  • F.lli MARIS S.p.A.

    Italy
    • plast alger 2018
    • Hall 1 1D.23
    The  strength of a Company lies in its staff, who, with their ideas, skills and dedication combine to become the heart of the Company. Maris, fully aware of this, constantly relies on its staff to deal with every request of the customer, from the simplest to the most technological challenges.  Maris makes customer care its work philosophy, identifying their requirements and providing solutions, which will grant complete satisfaction in terms of results, with particular attention to innovation.…
    Save
  • franco fabbri

    Visitor of epichem
    Save
  • Trementini Fabrizio

    Visitor of ITIB MACHINERY INTERNATIONAL
    Save
  • PAOLA FELLETTI SPADAZZI

    Visitor of CARPIGIANI
    Save
  • Film Blowing Coex Line

    plast alger 2016
    The line comprises of the following:  9 extruders comprising of 1 unit 30 mm, 31.8L/D extruder 1 unit 25 mm, 32 L/D extruder 7 unit 20 mm, 32.5 L/D extruders Screen changers on all extruders 9-layers pancake type die with a die diameter of 120 mm New Bubble cage as shown here with 6 rows of curved Teflon rollers, all adjustable synchronously Bubble diameter sensors to control film where the bubble is automatically inflated or deflated usin…
    Save
  • FIMIC Srl

    Italy
    • plast alger 2020
    • Hall 1 1D.25
    FIMIC’s adventure started 56 years ago, when we entered the field of recycling through the manufacture of guillotines for the cutting of industrial waste bales and rolls. Then, in 1996, we decided to improve the filtration method available at the time, which was fully done by hand, with the first FIMIC backflush entering into service the following year. Finally, one year later, the “scraping” system came into fruition. Today we showcase a long-term experience in the mechanical field, expanded …
    Save
  • Flanders Investment & Trade

    Belgium
    • plastprintpack Nigeria 2020
    • Landmark Centre - hall 2 2.E.05
    The Flanders Investment & Trade agency promotes sustainable international business, in the interest of both Flanders-based companies and overseas enterprises. Whatever sector you are involved in, Flanders Investment & Trade will help you establish contact with the Flemish companies you are looking for. This includes not only products or services you may be sourcing, but also various types of business relationships, from joint ventures to technology transfers. At another level Flanders Invest…
    Save
  • Flexographic printing press OPTIMA2

    Product of SOMA spol. s r.o.
    New
    • printpack alger 2020
    • Hall 2 2A.29
    • printpack alger 2018
    • Hall 2 2A.25
    The design concept of Optima and Optima2 is to produce flexographic printing presses covering up to 90% of normal production. Highly efficient rapid job change, with print consistency and reduction in running costs. http://www.soma-eng.com/products/flexographic-printing-presses/optima2
    Save
  • Frams for Big Bags

    Product of Rec-line
    plast alger 2016
    Designed for filling, empting and to hold your big bags. Suitable for food waste, plastic pallets and powder.
    Save
  • Frigel Firenze S.p.A.

    Italy
    • plastprintpack Nigeria 2020
    • Landmark Centre - hall 1 1.F.11
    Our Philosophy The constant search for ever more efficient and sustainable engineering solutions guides our imagination and our every effort. In Frigel, we are experts in refrigeration, but also profound connoisseurs of the client's business and, above all, of its industrial processes. This dual experience allows us to identify opportunities for improvement that lie behind the reduction of the cooling times of the processes, allowing us to design ad-hoc solutions for each process, ensur…
    Save
  • STANZIONE GAETANO

    Visitor of S.G.S.ITALIA SRL
    Save
  • Juliana Gervas

    Visitor of Blessed Vision General Supply Co.
    Save
  • Davide Giordano

    Visitor of Automa Spa
    Save
  • Luciano Giulini

    Visitor of Techart di L. Giulini
    Save
  • TROMBETTI GIUSSEPPE

    Visitor of tecnoconverting2000 SRL
    Save
  • GRA Water chiller units with air condensation

    • plast alger 2020
    • Hall 1 1C.40
    Description Water Cooling Units of the GRA series are air condensed monobloc groups. These are manufactured in two different versions: with a built-in tank or an external reservoir (V). These chillers are suitable for modular use with units of similar or different cooling capacity and at different times. The GRA range is especially suitable for cooling plastics and rubber working machines, die-casting machines, plating plants, ceramic presses and other industrial processes.
    Save
  • GraphicArt

    Product of Solema S.r.l.
    • printpack alger 2018
    • Hall 2 2A.03
    Our customers have printing or binding departments. Solema links them with its wide and flexible range of conveying systems, feeders and stackers, and set up lines with finishing equipments to automate cartoning and palletizing operations with own dedicated machines. We lead our customers to the maximum efficiency
    Save
  • GRAVIX gravimetric blender

    Product of MORETTO S.p.A.
    • plastprintpack Nigeria 2020
    • Landmark Centre - hall 1 1.G.11
    • plast alger 2020
    • Hall 1 1C.42
    • plast alger 2018
    • Hall 1 1D.18
    The DGM GRAVIX gravimetric dosing series developed by Moretto ensure precision levels with no equal even in presence of high vibrations and in the most heavy uses. With this range of products Moretto offers the smallest 6-component dosing unit in the market and the biggest one specially developed for PET-flakes for productions up to 5.500 Kg. The range has more than 1000 models suitable for production from 30 to 12.000 kg/h with dosages up to 12 materials. The weighing algorithm Vibration …
    Save
  • Gravure Full HD

    Product of INCI.FLEX S.R.L
    • printpack alger 2020
    • Hall 2 2B.39
    HD Flexo combines 4000 dpi HD optics with unique printing screening technologies to achieve sharper and more accurate imaging. The result is excellent print quality and a simplified plate production because the high-resolution optics deliver sharper imaging of text and lines and more clearly defined, better shaped screen dots. High resolution imaging on the CDI creates a textured surface on the plate, improving ink lay-down and increasing ink density on the final print. The result is improved im…
    Save
  • GRAVURE PRINTING

    • printpack alger 2020
    • Hall 2 2C.41
    Save
  • benameur hadid

    Visitor of ritmo
    Save
  • laila hajeb

    Visitor of am costruzioni
    Save
  • HR desiccant rotor drying

    Product of Piovan Group
    • plast alger 2020
    • Hall 1 1D.33
    • plast alger 2018
    • Hall 1 1C.30
    • plast alger 2016
    By adopting the honeycomb desiccant rotor technology, the HR Series is able to ensure maximum energy efficiency and versatility of application in small and medium productions. Airflow ranging from 50 up to 300 m3/h, with constant Dew Point value. Desiccant material (zeolite molecular sieves) is coated on the internal surface of the honeycomb structure guaranteeing a large absorbing capacity and zero dust emission. Continuous regeneration process and close loop cooling phase for high performance …
    Save
  • LUDOVICUS HUYSMANS

    Visitor of HUYSMANS
    Save
  • HYBRID TECHNOLOGY, 100% MADE IN ITALY

    Product of MAGIC MP Spa
    plast alger 2016
    The series of the hybrid machines has been designed in 2005 in order to introduce in the market an intermediate series between the traditional machines of that time (both manufactured by us and by our competitors) and our electric machines. The hybrid concept features hydraulic movements for mould opening/closing, blowpin and parison control, whilst the linear adjustable movement of the carriage is electromechanical (International Patent *) and the extruder has an electric drive. The IB series h…
    Save
  • I.S.T. Italia Sistemi Tecnologici S.p.A.

    Italy
    • plast alger 2020
    • Hall 1 1D.31
    • printpack alger 2018
    • Hall 2 2B.40
    Founded in 1987, IST began to design, manufacture and supply Solvent Reclaimers and Washing Systems. Security, Sustainability, Ecology and Economics: widespread concepts nowadays, they were targets since our inception; this long-term vision has allowed IST to get a positive feedback from the market placing the company as a sole partner and supplier of many customers worldwide. The experience gained over the years in sectors such as GRAPHICS, CHEMISTRY, AUTOMOTIVE, AEROSPACE, HOSPITALS, FI…
    Save
  • INCI.FLEX S.R.L

    Italy
    • printpack alger 2020
    • Hall 2 2B.39
    La société Inci.Flex est le résultat de trente années d'expérience dans le développement de l'emballage flexible. Elle est spécialisée dans la pre-press dont le but est la production de cliché pour la flexographie de haute qualité. Aujourd'hui elle s'agrandit avec la Gravure Helio, en offrant un service global pour son target. Inci.Flex est une entreprise qui excelle dans le secteur pour l'incessant évolution téchnologique et pour la recherche continue de nouveaux et plus efficaces méthodes d'or…
    Save
  • Industrial Frigo SRL

    Italy
    • plast alger 2020
    • Hall 1 1C.40
    Industrial Frigo srl was founded in 1969 by the entrepreneur Penocchio Camillo; its first production site was launched in 1970 in Calcinato Brescia, over a surface of 2.500 sq. m. The company built its experience in the cooling system and thermoregulation sector, achieving levels of know-how which today make it one of the world’s leading firms in the sector.
    Save